Home
Videos uploaded by user “Nehal J Wani”
Genymotion Share Local Files
 
03:48
This is a sample video showing how to share files with Android VM in GenyMotion Step 1: Configure Virtual Box Settings. Step 2: Start GenyMotion VM Step 3: Configure File Manager Step 4: Close and Open File Manager Step 5: Navigate to /mnt/shared/New-Folder Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 16226 Nehal J Wani
WhatsApp On Ubuntu 14.04 Using Genymotion
 
04:25
Simple video showing how to use Genymotion to install WhatsApp on Ubuntu 14.04 Steps for Whatsapp in Ubuntu 14.04: Step1: Download [Genymotion][1] Step2: Download [VirtualBox][2] Step3: `sudo dpkg -i virtualbox-4.3_4.3.12-93733~Ubuntu~raring_amd64.deb; sudo apt-get install -f` Step4: `bash genymotion-2.2.0_x64.bin; cd genytmotion; ./genymotion` Step5: Download image, run it and download [WhatpsApp][3] in the emulator Step6: Register with your mobile number, you'll receive a code. Enter it after 5 minutes. Working proof till step 5: https://www.youtube.com/watch?v=MHmMDEzsJEY [1]: https://goo.gl/TJV0Ht [2]: http://download.virtualbox.org/virtualbox/4.3.12/virtualbox-4.3_4.3.12-93733~Ubuntu~raring_amd64.deb [3]: http://www.whatsapp.com/android/current/WhatsApp.apk Wanna support me? Visit: https://www.paypal.me/nehaljwani
Views: 142166 Nehal J Wani
Solution to "Drive where windows is installed is locked" (UEFI Mode)
 
05:31
Music Track: 'Trips' By Topher Mohr and Alex Elena A simple video showing how to tackle with the problem "Drive where windows is installed is locked" or "A required drive partition is missing" or "The requested system device cannot be found" when Windows is installed in UEFI Mode. Wanna support me? Visit: https://paypal.me/nehaljwani Win8_Image: https://onedrive.live.com/redir?resid=513066133E61F6FA!142&authkey=!AL48G3xvY8yyRQU&ithint=file%2ciso https://drive.google.com/file/d/0B8gx-_8z_Gq_NU9kZlAxaU52MGc/view?usp=sharing [List of Standard Replies] Please watch my video with annotations turned on. You have to shrink an existing windows partition to create space for creating an EFI partition. Example: https://www.youtube.com/watch?v=lfv9UYjrPhQ In order for me to help you, Please share the output for the commands: diskpart list disk sel disk 0 list vol list partition Take a picture of the output using your smartphone / camera and upload them on picpaste.com and share the link. For RAW guys: Your C: is being shown as RAW. It should be shown as NTFS. Somehow you seem to have screwed up your partition file system. Type the command: chkdsk /f /r C: If you get the error stating "chkdsk not allowed for RAW...", then do the following: Download system rescue disk from http://www.sysresccd.org/ create a bootable usb using the method mentioned in http://www.sysresccd.org/Sysresccd-manual-en_How_to_install_SystemRescueCd_on_an_USB-stick (you can also follow https://www.youtube.com/watch?v=8iqZuCmM2fg), and use the tutorial http://www.cgsecurity.org/wiki/TestDisk_Step_By_Step to recover back your partition or recover data from it. diskpart sel disk 0 sel partition X shrink desired = 200 minimum = 200 create partition efi format fs = fat32 assign letter = b: exit md b:\EFI md b:\EFI\Microsoft cd /d b:\EFI\Microsoft bootrec /fixboot bcdboot Y:\Windows /l en-us /s b: /f ALL Download https://onedrive.live.com/redir?resid=513066133E61F6FA!142&authkey=!AL48G3xvY8yyRQU&ithint=file%2ciso and follow https://www.youtube.com/watch?v=Q8gQuYekACU to create a bootable USB, boot from it, and then share the output for the commands: diskpart list disk sel disk 0 list vol list partition Take a picture of the output using your smartphone / camera and upload them on imgur.com or picpaste.com and share the link. For fixed disks guys: Check your connecting cables attached the HDD to the computer. Make sure they are not loose. When you start your computer, you need to press some key to enter "Setup" which are your BIOS settings. In that, there is an option to choose SATA mode. What is the value that you have set? Is it AHCI?
Views: 956565 Nehal J Wani
Install Arch Linux 2014 in UEFI Mode (Dual Boot Windows 7/8/10)
 
16:58
A tiny tutorial to show how to dual boot Arch Linux with Windows 8 in UEFI Mode. Here is a list of what I do in the video: (i) Make some space for Arch Linux in Windows (ii) Make a bootable installation media for Arch Linux (Not covered in this tutorial) (iii) Attach it to your computer (iv) Shutdown Windows after disabling fast shutdown. And use the command shutdown -s -t 0 to do so. (v) Boot into Arch Linux Installation media in UEFI Mode. (vi) Create two partitions in that empty space: (a) Swap (b) Root Partition gdisk /dev/sda n #Wanna create new partition! #Hit enter, don't care about partition number #Hit enter, automatically first sector will be starting of unallocated space +2GB #Specify the size of the swap partition 8200 #Hex code for the Linux Swap partition. w #Write changes to disk Y #Confirm! Type gdisk -l /dev/sda to find out the partition number of the swap partition. In my case, it is 5. mkswap -L "Linux Swap" /dev/sda5 #Linux Swap is the label swapon /dev/sda5 #Turn on swap! free -m #Last line will confirm whether swap space has been turned on or not. #Time to create partition in which Arch will be installed. gdisk /dev/sda n #Wanna create new partition! #Hit enter, don't care about partition number #Hit enter, automatically first sector will be starting of unallocated space #Hit enter, automatically rest of the unallocated space will be filled #Hit enter, default Hex code for the Linux Partition. w #Write changes to disk Y #Confirm! (vii) Format the partition into filesystems. Type gdisk -l /dev/sda to find out the partition number of the newly created partition. In my case, it is 6. mkfs.ext4 -L "Arch Linux" /dev/sda6 #Format the new partition with ext4 file system. (viii) Mount the partition in which Arch Linux files will be present to /mnt mount /dev/sda6 /mnt (ix) Use pacstrap to initialize the Arch Installation If you are behind a proxy server, type: export http_proxy=http://proxy_ip_or_domain:proxy_port pacstrap /mnt base (x) Find and mount the efi partition to /mnt/boot/efi mkdir -p /mnt/boot/efi #Type gdisk -l to figure out the partition number of the existing EFI partition. In my case, it is 2. mount /dev/sda2 /mnt/boot/efi (xi) Generate the fstab, so that required partitions are mounted on reboot. genfstab -p /mnt | tee /mnt/etc/fstab (xii) chroot into the arch installation. arch-chroot /mnt (xiii) Configure timezone, generate initial RAM disk. #Chang password for root user passwd ln -s /usr/share/zoneinfo/Asia/Kolkata /etc/localtime mkinitcpio -p linux (xiv) Install the bootloader. I use grub. pacman -Syu grub efibootmgr grub-mkconfig -o /boot/grub/grub.cfg #Generate initial grub config. grub-install /dev/sda (xv) Install the desktop environment, display manager, and vim and xterm. pacman -Syu gnome-desktop xterm vim gdm sudo pacman -Syu wpa_supplicant wireless_tools networkmanager network-manager-applet gnome-keyring systemctl enable NetworkManager.service systemctl enable wpa_supplicant.service systemctl enable gdm #Start gdm on boot (xvi) Create a new user and add him to the group wheel. useradd -G wheel -s /bin/bash -m -c "Nehal J Wani" wani passwd wani (xvii) Reboot into Arch Linux reboot (xviii) Install os-prober. Regenerate grub configuration. Reboot. pacman -Syu os-prober grub-mkconfig -o /boot/grub/grub.cfg Done! Now you can choose between Windows and Arch Linux at the start. Yay! If you have an ACER laptop, please perform the following extra steps: AFTER installing Arch Linux and setting up the loader in the FAT32 EFI partition, the steps are: 1. Get into BIOS - by pressing F2 when computer boots 2. Set Supervisor password 3. Ensure Secure Boot is on 4. Go to "Select an UEFI file as trusted for execution" and choose: EFI - arch - grubx64.efi 5. Turn off Secure Boot 6. In section 'Main', select F12 Boot Menu and change it to 'Enabled' 7. -Optionally, clear Supervisor password 8. Save BIOS settings and restart 9. Press F12 on boot and now you can choose Arch.
Views: 166006 Nehal J Wani
Install RHEL 7 in UEFI Mode (Dual Boot Windows 8)
 
05:20
This is a sample video showing how to install RHEL 7 in UEFI Mode and Dual Boot with Windows 8 Step1: Make some space for installing RHEL 7 in Windows Step2: Boot RHEL 7 Installation Disc in UEFI mode Step3: Start Installation Step4: Make some partitions in the free space Step5: Continue with the installation Step6: Boot into newly installed RHEL 7 Create Bootable USB for RHEL 7: https://www.youtube.com/watch?v=9RM17IwSzMU
Views: 49675 Nehal J Wani
How To Safely Uninstall/Remove/Delete Linux (UEFI System, Windows Dual Boot)
 
08:44
This is a tiny tutorial showing how to uninstall/remove/delete Linux when dual booting with Windows in UEFI Mode (From Windows). Steps: 1. Deleting the partitions 1.1 Open Disk Management to figure out all the partitions that are related to Linux. 1.2 Press Win + R, type diskmgmt.msc and hit Enter. 1.3 Once you have identified the Linux partitions, delete them. Make sure you don't delete any recovery or system partition(s). 1.4 (Optional) Expand your Windows partition to occupy the free space. 2. Removing the boot entry from EFI paritition 2.1 Remove the UEFI entry for Linux 2.1.1 Open elevated command prompt 2.1.2 Type bcdedit /enum all to view all boot related entry 2.1.3 Copy and paste the UUID of the entry. Select - Right Click 2.1.4 Type bcdedit /delete {UUID} 2.2 Remove the boot files for Linux 2.2.1 Find the EFI partition containing the Linux Installation 2.2.2 Inside the command prompt, type: diskpart list vol sel vol X (Replace X with the volume number of the EFI partition) assign letter = Z: exit 2.2.3 Delete the directory: Z:\EFI\(Name-of-the-Linux-Distribution) by typing: rmdir /S Z:\EFI\(Name-of-the-Linux-Distribution) 3. Done! Reboot! :) 4. Now, turn of fast startup in Windows and do a hard reboot. Then enable fast startup. Music: 0:00 - 04:23 That Kid in Fourth Grade Who Really Liked the Denver Broncos by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/uvp/ Artist: http://chriszabriskie.com/ Music: 04:24 - 08:43 The Temperature of the Air on the Bow of the Kaleetan by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/uvp/ Artist: http://chriszabriskie.com/ Wanna support me? Visit: https://paypal.me/nehaljwani Visit: https://www.patreon.com/nehaljwani
Views: 72416 Nehal J Wani
Install RHEL 7 in Legacy Mode (Dual Boot Windows Server 2008 R2)
 
08:25
This is a sample video showing how to install RHEL 7 in Legacy Mode and Dual Boot with Windows Server 2008 R2 Step1: Make some space for installing RHEL 7 in Windows Step2: Boot RHEL 7 Installation Disc in Legacy mode Step3: Start Installation Step4: Make some partitions in the free space Step5: Continue with the installation Step6: Boot into newly installed RHEL 7 Step7: Add a menu entry for Windows in /etc/grub.d/41_custom Step8: Reboot. Done! Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 18996 Nehal J Wani
Statistical Machine Translation with MOSES Decoder || Part 1 : Installing Moses
 
05:07
Quick Tutorial for Setting up Moses Part 1 *** Installing MOSES Decoder *** Install required pacakages : sudo apt-get install g++ git automake libtool zlib1g-dev libboost-all-dev libbz2-dev liblzma-dev libgoogle-perftools-dev Clone Moses from Github : git clone https://github.com/moses-smt/mosesdecoder.git Download & Install GIZA++ git clone https://github.com/moses-smt/giza-pp.git cd giza-pp make Copying GIZA++ Binaries to MosesDecoder: cd ~/mosesdecoder mkdir tools cp ~/giza-pp/GIZA++-v2/GIZA++ ~/giza-pp/GIZA++-v2/snt2cooc.out ~/giza-pp/mkcls-v2/mkcls tools Install Moses ./bjam (NOTE : This may take a lot of time! ) +===================================================================================+ ** OPTIONAL LMs ** If you want to use IRSTLM language model : Install IRSTLM : Download & Extract IRSTLM from : http://sourceforge.net/projects/irstlm/files/irstlm/ {We downloaded irstlm-5.80.08.tgz so further instructions will be using it } cd irstlm-5.80.08 cd trunk ./regenerate-makefiles.sh ./configure --prefix=$HOME/irstlm [NOTE : $HOME = the path where you want to install irstlm] make install Install Moses with irstlm : cd ~/mosesdecoder/ ./bjam --with-irstlm +====================================================================================+
Views: 5553 Nehal J Wani
Solution to "Drive where windows is installed is locked" (Legacy Mode)
 
12:02
A simple video showing how to tackle with the problem "Drive where windows is installed is locked" or "A required drive partition is missing" or "The requested system device cannot be found" when Windows is installed in Legacy Mode. All that I do in the video is documented here: https://gist.github.com/nehaljwani/8a71cc1933c29e611e9e850efe7c681d Wanna support me? Visit: https://www.patreon.com/nehaljwani Win8_Image: https://onedrive.live.com/redir?resid=513066133E61F6FA!142&authkey=!AL48G3xvY8yyRQU&ithint=file%2ciso In order for me to help you, Please share the output for the commands: diskpart list disk sel disk 0 list vol list partition Take a picture of the output using your smartphone / camera and upload them on imgur.com or picpaste.com and share the link. Download system rescue disk from http://www.sysresccd.org/ create a bootable usb using the method mentioned in http://www.sysresccd.org/Sysresccd-manual-en_How_to_install_SystemRescueCd_on_an_USB-stick (you can also follow https://www.youtube.com/watch?v=8iqZuCmM2fg), and use the tutorial http://www.cgsecurity.org/wiki/TestDisk_Step_By_Step to recover back your partition or recover data from it. For RAW guys: Your C: is being shown as RAW. It should be shown as NTFS. Somehow you seem to have screwed up your partition file system. Type the command: chkdsk /f /r C: If you get the error stating "chkdsk not allowed for RAW...", then do the following: Download system rescue disk from http://www.sysresccd.org/ create a bootable usb using the method mentioned in http://www.sysresccd.org/Sysresccd-manual-en_How_to_install_SystemRescueCd_on_an_USB-stick (you can also follow https://www.youtube.com/watch?v=8iqZuCmM2fg), and use the tutorial http://www.cgsecurity.org/wiki/TestDisk_Step_By_Step to recover back your partition or recover data from it.
Views: 237528 Nehal J Wani
Windows 7/8/10 Reset Forgotten Password (Linux Method)
 
06:54
Simple tutorial showing how to reset any Windows 7/8/10 account password using Linux. Reset Windows 7/8/10 Password =============================== The Linux Method You can use any Linux live media for this. But I prefer system rescue disk. After booting, the procedure is same, irrespective of the Linux based media used. Download system rescue disk from http://www.sysresccd.org/ and create a bootable usb using the method mentioned in http://www.sysresccd.org/Sysresccd-manual-en_How_to_install_SystemRescueCd_on_an_USB-stick . You can also follow https://www.youtube.com/watch?v=8iqZuCmM2fg Boot using the USB / CD. Type gdisk -l /dev/sda to find out the existing partitions in your Hard Disk. Mount the partition in which Windows is installed (the one that contains the Windows folder). mount /dev/sda? /mnt (Replace ? with the partition number. In my case, it is /dev/sda2) Change directory to /mnt/Windows/System32/config cd /mnt/Windows/System32/Config Clear out password for your user. chntpw -i SAM Press 1 and hit enter. Enter the hex code for the user you want to change password for. Press 1 and hit enter. Press q and hit enter. Press q and hit enter. Press y and hit enter. After you overwrite the Security Account Manager (SAM) Hive, change directory to /root Type cd and press enter. Unmount the Windows partition mounted on /mnt. umount /mnt Type reboot and hit enter. Now, remove the USB/CD and boot into Windows. You will be able to sign in without any password. In case of Windows 10, press ctrl + alt + del and set account password. In case of Windows 7/8, go to Control Panel/PC Settings to set account password. Done! :D That is all folks! :D :) Music: Waltz of the Flowers (by Tchaikovsky) Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 41054 Nehal J Wani
Install CentOS 7 in UEFI Mode (Dual Boot Windows 8)
 
05:40
This is a sample video showing how to install CentOS 7 in UEFI Mode and Dual Boot with Windows 8 Step1: Make some space for installing CentOS 7 in Windows Step2: Boot CentOS 7 Live Disc in UEFI mode Step3: Start Installation Step4: Make some partitions in the free space Step5: Continue with the installation Step6: Boot into newly installed CentOS 7 Here is what I do from 1:46 to 2:21 I click on "I will configure partitioning". I click on Done. I select standard partition as the partitioning scheme. I click on "Click here to create them automatically" I delete the partition /boot/efi I select the EFI partition already created by Windows 8 (which was installed in UEFI mode) Then I set it's mount point to /boot/efi (Since there is no need to have more than one EFI partitions, I deleted the previous one) I click on update settings. Then, since my RAM is 4GB, I intend to have only 2GB of Swap Space. Hence I decrease the amount of swap space to 2GB. I click on update settings. Since I had opted not to create a new EFI partition, some space was free, which I intend to allot to the partition mounted on / Since I don't know the exact amount of space remaining, I enter 177GB and then click update settings, installer is intelligent enough to allocate the maximum remaining amount it can. Then I click Done. Then I click Accept Changes. Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 78201 Nehal J Wani
Convert Windows 7/8/10 Installation from Legacy to UEFI Without Data Loss (Simpler Method)
 
14:26
How to convert Legacy to UEFI Without Data Loss (Simpler Method) I previously had a tutorial for this at https://www.youtube.com/watch?v=Qk6_K9hVu_k but is was fairly complicated. This is a simplified process. Please note that this method has been tested only for 64bit installations. 1. Download gpt-fdisk (gdisk) for Windows. 2. Copy the binary to a known location. 3. Boot into Windows Recovery Environment. - If you don't have one, download Windows10ISO from: https://www.microsoft.com/en-in/software-download/windows10ISO - Create a bootable USB by following https://www.youtube.com/watch?v=Q8gQuYekACU or by burning the ISO to a DVD. 4. Shutdown Windows and boot using this media (Legacy or UEFI Mode). 5. Get to the command prompt. Either by pressing Shift+F10 or by navigating to it. 6. Go to diskpart and find out the disk identifier for your Windows installation. diskpart list disk sel disk X list par 7. Navigate to the location where gdisk binary is kept and type: gdisk -l X: (Replace X with the disk number) This will list out the partitions available in the disk. Make sure this is the one your want to convert. 8. Now, convert the partition table from MBR to GPT. gdisk X: Type w to write changes. Press Y whenever prompted. 9. Type the following commands: diskpart sel disk X (Replace X with the disk number) list par # Now we make some space for our EFI partition # Note the partition number of the partition which you want to shrink sel par X (Replace X with the partition number) # You may delete the System Reserved partition and replace it with the EFI partition. To do that, type: # sel par X (Replace X with the System Reserved Partition) # del par override # The shrink command is not required if you do the above two commands. # I'll just go ahead and shrink. 500MB extra doesn't matter to me :D shrink desired = 200 minimum = 200 # The following commands are common: create par efi size = 200 format fs = fat32 quick # Format this with fat32 file system assign letter = Z: exit 9. Copying boot files. Find out the partition in which Windows is installed. Note, the partition letter here might be different than the partition letter you see in Windows. Perform dir X: on each partition letter you think can have the Windows installation and confirm X. Then type: bcdboot X:\Windows /l en-us /s Z: /f ALL 10. Done. Now reboot in UEFI mode. Let's check if we have indeed booted in UEFI or not!! Type msinfo32 in run and hit enter. Yay!! Done! Windows 7 Users Please Note: For Win7 users, one can either use a Win8 or Win10 USB/DVD, or use the newer version of bcdboot.exe from https://drive.google.com/file/d/0B8d4Lb_KJbfdNHdtUWE4eUhZOG8/view?usp=sharing Music: 00:00 - 05:16 Daily Beetle by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1500025 Artist: http://incompetech.com/ Music: 05:17 - 11:53 Cryin In My Beer by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Music: 11:54 - 14.25 'Calypso Beach Walk' By 'Doug Maxwell/Media Right Production' Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 150108 Nehal J Wani
Install Fedora 21 in UEFI Mode (Dual Boot Windows 8)
 
04:59
Step1: Make some space for installing Fedora 21 in Windows Step2: Boot Fedora 21 Installation Disc in UEFI mode Step3: Start Installation Step4: Make some partitions in the free space Step5: Continue with the installation Step6: Boot into newly installed Fedora 21 Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 26032 Nehal J Wani
Install Fedora 23 in UEFI Mode (Dual Boot Windows 7/8/10)
 
09:36
This is a tiny tutorial for dual booting Fedora 23 with Windows 7/8/10 in UEFI Mode. After creating some space in Windows, follow: 0. Check if you have booted the installation media in UEFI mode or not. - Fire up a terminal and type the command: [ -d /sys/firmware/efi ] && echo UEFI || echo Legacy 1. Click on 'Install on Hard Drive' 2. Select Language and clik on 'Continue' 3. Wait for sometime and then click on 'Installation Destination' 4. Now you either click on 'Automatically configure partitioning' and then click 'Done' OR: Click on 'I will configure partitioning' and then click on 'Done' 5. Now you can either select a predefined partitioning scheme out of Btrfs/LVM/Standard Partitioning and then click on 'Click here to create them automatically' OR: 5.1 Select 'Standard Partition' 5.2 Choose existing EFI partition and set the mount point to /boot/efi and click on 'Update Settings' 5.3 Click on '+' to create a new partition and select 'swap' as the mount point. 5.4 Click on '+' to create a new partition and select '/' as the mount point and choose the desired space to be 999999 so that this one takes up the entire remaining space. 6. Click on 'Done' and then click on 'Accept Changes' 7. Click on 'Begin Installation' 8. Click on 'Root Password' and set the root password. 9. Click on 'User Creation' to create a user. Tick on 'Make this user administrator' only if you want this user to have sudo access. 10. Click on 'Quit' and then reboot to check if you are able to boot into the newly installed Fedora 23 Music: 0:00-7:17 Brandenburg Concerto No4-1 BWV1049 - Classical Whimsical by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100303 Artist: http://incompetech.com/ Music 7:17-9:34 'Scapes' By Silent Partner Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 59683 Nehal J Wani
Install Debian 8.1 (Jessie) in UEFI Mode (Dual Boot Windows 8/8.1/10)
 
08:35
This is a tiny tutorial for dual booting Debian 8.1 (Jessie) with Windows 8/8.1/10 in UEFI Mode. Step1: Make some space for Debian 8.1 in Windows Step2: Boot Debian installation disk in UEFI Mode. This method can also be used for Debian 8.6.0. Visit: http://cdimage.debian.org/debian-cd/current/amd64/iso-dvd/ to download the ISO Step3: Make two partitions in the free space Step4: Install Debian 8.1 in those partitions. Step5: Boot into freshly installed Debian 8.1 Step6: Reboot. Done Music: Mario Bava Sleeps In a Little Later Than He Expected To by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/vendaface/ Artist: http://chriszabriskie.com/ Wanna support me? Visit: (i) https://paypal.me/nehaljwani (ii) https://www.patreon.com/nehaljwani
Views: 73767 Nehal J Wani
Install SteamOS in UEFI Mode (Dual Boot Windows 8)
 
06:21
This is a sample video showing how to install SteamOS in UEFI Mode and Dual Boot with Windows 8 Step1: Make some space for installing SteamOS in Windows Step2: Boot SteamOS Live Disc in UEFI mode Step3: Start Installation Step4: Make two partitions in the free space Step5: Continue with the installation Step6: Boot into newly installed SteamOS Step7: Let the updates finish, let the configuration of kernel modules finish. Step8: Done. Reboot. Music: "Golden Days" by "Topher Mohr and Alex Elena" Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 15746 Nehal J Wani
Install Manjaro Linux Openbox Edition in UEFI Mode (Dual Boot Windows 8)
 
06:01
This is a sample video showing how to install Manjaro Linux Openbox Edition in UEFI Mode and Dual Boot with Windows 8 Step1: Make some space for installing Manjaro Linux in Windows Step2: Boot Manjaro Linux Live Disc in UEFI mode Step3: Start Installation Step4: Make two partitions in the free space Step5: Continue with the installation Step6: Boot into newly installed Manjaro Linux Step7: run the command: grub-mkconfig -o /boot/grub/grub.cfg, Step8: Done. Reboot. Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 16028 Nehal J Wani
Install Slackware 14 in UEFI Mode (Dual Boot Windows 8)
 
16:39
This is a sample video showing how to install Slackware 14 in UEFI Mode and Dual Boot with Windows 8 Step1: Make some space for Slackware 14 in Windows Step2: Boot Slackware 14 installation disk in UEFI Mode Step3: Make two partitions in the free space Step4: Install Slackware 14 in those partitions Step5: Select Elilo as the default boot loader. Step6: Boot into freshly installed Slackware 14 and replace Elilo with Grub Step7: Manually add the boot menu entry in grub.cfg Step8: Reboot. Done Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 13982 Nehal J Wani
Install FreeBSD 10 in UEFI Mode (Dual Boot Windows 8/8.1/10)
 
20:51
A tiny tutorial to show how to dual boot FreeBSD with Windows 10 in UEFI Mode. Here is a list of what I do in the video: 1) Make some space for FreeBSD in Windows 10 2) Attach the Installation Media. I used: ftp://ftp.freebsd.org/pub/FreeBSD/releases/amd64/amd64/ISO-IMAGES/10.2/FreeBSD-10.2-RELEASE-amd64-uefi-disc1.iso 3) Boot using the installation media, make three partitions: EFI ~1MB Swap ~2GB Root ~Rest in GBs.. 4) After installation, opt for shell, and install GUI by doing: pgk install gnome-desktop gdm xorg xf86-video-fbdev 5) Add the following lines in /etc/rc.conf gnome_enable="YES" moused_enable="YES" dbus_enable="YES" hald_enable="YES" 6) Reboot straight into Windows. 7) Download rEFInd Boot Manager and Download and install EasyUEFI. 8) Open Diskpart and sel the volume which has the FAT32 EFI partition of Windows. Assign it a letter. 9) Copy the folder contents of refind to desktop and then copy it from desktop to the above partition in \EFI\refind . Rename refind sample conf to refind.conf 10) Setup a boot entry for rEFInd and make it the first boot entry. 11) Reboot! 12) Most of the computers allow you to press some key and enter into the Boot Options. Add a boot entry/option for FreeBSD using EasyUEFI! Done! Now you can choose between Windows and FreeBSd at the start. Yay! Background Songs: Vespers - 3:17 Venice Beach - 2:56 Reasons to Smile - 3:11 Monks - 3:09 Hey Girl - 2:25 Sweet as Honey - 3:20 Cielo - 2:32 Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 22169 Nehal J Wani
How To Safely Move Space From Windows 7/8/10 to Ubuntu (GPT + UEFI Mode)
 
15:13
Tiny tutorial to show how to move space from Windows 7/8/10 to Ubuntu when installed in UEFI Mode. 1. Make some space which you want to devote to Ubuntu. 1.1 Open disk management and shrink the partition which is just before starting of Ubuntu partitions. 1.2 In my case, I have three Ubuntu partitions (swap, /home and /). Identify yours. 1.3 As you can see, I have two Windows partitions with labels OS and Data. In this tutorial, I'll take 5GB of space from the Data partition and give it to / of Ubuntu. 1.4 Shrink the existing partition and leave the unallocated space as it is. 1.5 Turn off fast startup inside Windows. 1.6 That's it inside Windows. 2. Moving partitions 2.1 Boot using system rescue disk. If you don't have it already, get it from http://www.sysresccd.org/Download and create a bootable USB by following https://www.youtube.com/watch?v=8iqZuCmM2fg 2.2 System Rescue disk is optional. You can use any Linux 'Live' media with Gparted inside it. In this tutorial, I'll use Ubuntu Installation Media. Follow https://www.youtube.com/watch?v=XoINdNWVgYo to create a bootable USB. Boot from it. 2.3 Open gparted 2.4 Turn off swap. 2.5 Since my swap partition is in between, I'm gonna delete it. I'll recreate it again, later. 2.6 Move ubuntu_home 'backwards' so that the free space is transferred between ubuntu_home and ubuntu_root partitions. 2.7 Grow ubuntu_root 'backwards' to occupy the 5GB space. 2.8 Create the swap partition at the end, occupying the remaining free space (in my case, it was 2048MB). 3. Updating /etc/fstab 3.1 Now, we need to edit fstab to tell it about the new swap partition and also check if there is any change in the UUIDs of any partitions. If there is any, we will need to update it. 3.2 Mount the partition in which Ubuntu is installed to /mnt . Use gdisk to know where that partition is. 3.3 Use the command blkid to know about the UUIDs of the new partitions. 3.4 Update the UUIDs in /mnt/etc/fstab 4. Regenerate Grub Configuration 4.1 Mount (in bind mode) some more directories. Use the command: for i in /dev /dev/pts /proc /sys /run; do mount -B $i /mnt/$i ; done 4.2 Find and mount the EFI partition to /mnt/boot/efi 4.3 Chroot into /mnt 4.4 Regerate Grub Configuration. grub-mkconfig -o /boot/grub/grub.cfg 4.5 Setup grub again. grub-install /dev/sda 5. Done. Reboot! Music: 00:00 - 04:48 Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100499 Artist: http://incompetech.com/ Music: 04:49 - 10:15 Namaste by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Music: 10:16 - 15:13 Over Time by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 15395 Nehal J Wani
Install Kali Linux 2.0 (Sana) in UEFI Mode (Dual Boot Windows 8/8.1/10)
 
15:17
If you think this video is helpful, you can encourage me to make more of these videos by helping me at https://www.paypal.me/nehaljwani Inner Light (9:36) by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300021 Artist: http://incompetech.com/ Smooth Sailing (with Guitar) (5:36) by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ This is a tiny tutorial for dual booting Kali Linux 2.0 Sana with Windows 8/8.1/10 in UEFI Mode. Step 1. Make some space in Windows for installing Kali LInux. Step 2. Create Bootable Installation Media (Use Win32 DiskImager in Windows or use dd in Linux) I used the disk: http://cdimage.kali.org/kali-2.0/kali... Step 3. Boot using this media in LEGACY BIOS/CSM mode. I know, that Kali Linux 2.0 claims to support UEFI, but for me, it didn't work. Even the hypervisors Qemu and VMWare segfaulted. Step 4. Create at least two partitions (I created swap and one for /). DO NOT create any bios_grub partition and DO NOT setup any boot loader. Continue with the installation, but skip setting up boot loader. Step 5. Create Bootable Installation Media for any Linux Distribution, which is UEFI compatible, and supports live mode. I prefer System Rescue Disk: https://sourceforge.net/projects/systemrescuecd/files/sysresccd-x86/4.7.1/systemrescuecd-x86-4.7.1.iso/download . You can also use Ubuntu Installation Media. Step 6. Boot using this media in UEFI mode. Make sure it is UEFI, otherwise it won't work. Once booted, fire up a terminal and type [ -d /sys/firmware/efi ] && echo UEFI || echo BIOS to confirm. Step 7. Use gdisk to figure out which partition contains your Kali Linux installation. For me, it was /dev/sda4. Might be different for you. Type gdisk -l /dev/sda to figure it out. Step 8. Mount the Kali Linux partition to /mnt. Also mount (in bind mode) /dev /dev/pts /proc /sys Step 9. Create the directory /mnt/boot/efi Step 10. Mount the EFI partition to the newly created directory. Use gdisk -l /dev/sda to figure that out. For me, it was /dev/sda1 Step 11. Chroot into /mnt. Step 12. Add sana repository, using the command: echo "deb http://http.kali.org/kali sana main non-free contrib" | tee /etc/apt/sources.list NOTE: If you are using Kali Roling, then using the command: echo "deb http://http.kali.org/kali kali-rolling main contrib non-free" | tee -a /etc/apt/sources.list Step 13. Update apt-get. apt-get update Step 14. Install grub-efi package. apt-get install -y grub-efi Step 15. Setup grub. grub-mkconfig -o /boot/grub/grub.cfg ; grub-install /dev/sda Step 16. Reboot, boot into Kali, and run grub-mkconfig -o /boot/grub/grub.cfg again Tada! Done! Note: If you get 'unable to resolve' errors, please type: echo "nameserver 8.8.8.8" | sudo tee /etc/resolv.conf Some machines have weird UEFI implementation, and grub-install doesn't work from under a chroot environment, because it throws the error: efibootmgr: Skipping unreadable variable "Boot0005": Input/output error efibootmgr: Could not prepare boot variable: Input/output error In such cases, after you do grub-mkconfig -o /boot/grub/grub.cfg , just come out of chroot by typing exit, and then type: efibootmgr -c -d /dev/sda -p 1 -l /EFI/kali/grubx64.efi -L "KaliLinux" #Replace 1 with the partition number of the EFI partition. If you have an Acer Laptop, please go through: https://forums.kali.org/showthread.php?28918-Acer-Aspire-v11-Dual-Booting-Kali-Linux-in-UEFI-Mode
Views: 97859 Nehal J Wani
How to create Bootable USB for Fedora 20 (UEFI and Legacy Compatible)
 
05:24
Sample video showing how to create UEFI and Legacy compatible bootable installation media for Fedora 20 in Windows. This method also works for older versions of Fedora. Music: 'Grass' By Silent Partner Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 8235 Nehal J Wani
Install Zorin OS 8 in UEFI Mode (Dual Boot Windows 8)
 
07:57
This is a sample video showing how to install Zoris OS 8 in UEFI Mode and Dual Boot with Windows 8 Step1: Make some space for Zorin OS in Windows Step2: Boot Zorin OS live disk in Legacy mode Step3: Make two partitions in the free space Step4: Install Zorin OS in those partitions Step5: Boot Ubuntu Live Media in UEFI Mode Step6: Mount Zorin OS partition on /mnt Step7: Mount EFI partition on /mnt/boot/efi Step8: Mount /dev/pts /dev/ /proc /sys /var/run /run on /mnt$i Step9: Chroot into /mnt Step10: Install grub-efi, run grub-mkconfig -o /boot/grub/grub.cfg, run grub-install /dev/sda Step11: Done. Reboot. Music: 0-3:34 Don't Turn Back by 'Silent Partner' 3:35- Believer by 'Silent Partner' Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 13433 Nehal J Wani
Install ApricityOS 2015 in UEFI Mode (Dual Boot Windows 7/8/10)
 
10:30
Install ApricityOS in UEFI Mode (Dual Boot Windows 7/8/10) Here is what I do in the video: After making some space in Windows, follow: 0. Check if you have booted the installation media in UEFI mode or not. - Fire up a terminal and type the command: [ -d /sys/firmware/efi ] && echo UEFI || echo Legacy If it says UEFI, then continue. If it says Legacy, then type: sudo gdisk -l /dev/sda If it says GPT: present, then boot the installation media in UEFI mode. Otherwise, this is not the video for you. 1. Switch to Apricity OS Installer, select Language and click next. 2. Select Timezone and click next. 3. Select Keyboard layout and click next. 4. Select 'Manual partitioning' and click next. 5. Time to create some partitions. - Select the existing fat32 efi partition (size ~200MB) and set the mount point to /boot/efi. - Select the free space and create a new partition on it with filesystem linux-swap. - Select the remaining free space and create a new partition with the filesystem ext4 and mount point / - Click next :) 6. Enter your account details and click on next. 7. The next page will display most of the options selected. Confirm and then click next. 8. The installation might take some time, I'll fast forward it. :) :) :) 9. Click on next then reboot. Music: 00:00-03:34 Dream Culture by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300046 Artist: http://incompetech.com/ 03:35-07:18 Rubix Cube by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ 07:19-10:30 Forever Believe by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Views: 17961 Nehal J Wani
How to create Bootable USB for RHEL 7 (UEFI and Legacy Compatible) In Windows
 
07:09
A short video explaining how to create a bootable USB for RHEL 7 (UEFI and Legacy Compatible) in Windows. Steps: 1. Download RHEL 7 ISO 2. Download and install Win32 Disk Imager 3. Write ISO to USB 4. Install RHEL 7 (Not included in this tutorial) 5. Reboot into Windows, bring back USB to original form using diskpart Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 24979 Nehal J Wani
Install Xubuntu 14.04 in UEFI Mode (Dual Boot Windows 8)
 
07:48
This is a sample video showing how to install Xubuntu 14.04 in UEFI Mode and Dual Boot with Windows 8 Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 22003 Nehal J Wani
Install Debian 7.5.0 (Wheezy) in UEFI Mode (Dual Boot Windows 8)
 
18:22
This is a sample video showing how to install Debian 7.5.0 (Wheezy) in UEFI Mode and Dual Boot with Windows 8 Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 59241 Nehal J Wani
Configure Ubuntu for 802.1x Authentication
 
01:17
Some versions of Ubuntu have trouble connecting to a LAN network where 802.1x authentication is enabled. This method suggests a way around it. Bug: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1104476 Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 15616 Nehal J Wani
Install LinuxLite 2.0 in UEFI Mode (Dual Boot Windows 8)
 
12:28
This is a sample video showing how to install LinuxLite 2.0 in UEFI Mode and Dual Boot with Windows 8 Step1: Make some space for installing LinuxLite 2.0 in Windows Step2: Boot LinuxLite 2.0 Live Media in Legacy mode Step3: Make three partitions in the free space Step4: Install LinuxLite 2.0 in those partitions Step5: Boot Ubuntu Live Media in UEFI Mode Step6: Mount LinuxLite 2.0 partition on /mnt Step7: Mount EFI partition on /mnt/boot/efi Step8: Mount /dev/pts /dev/ /proc /sys /var/run /run on /mnt$i Step9: Chroot into /mnt Step10: apt-get update; apt-get purge -y --force-yes grub* shim-signed linux-signed* ; apt-get install -y --force-yes grub-efi-amd64-signed shim-signed linux-signed-generic Step11: Reboot into Linux LIte. Step 12: Open Terminal, run grub-mkconfig -o /boot.grub.grub.cfg; grub-install /dev/sda Step 13. Done. Reboot! Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 9078 Nehal J Wani
Install ElementaryOS x64 (Freya) in UEFI Mode (Dual Boot Windows 7/8/10)
 
10:03
Install ElementaryOS (Freya) in UEFI Mode (Dual Boot Windows 7/8/10) Tested on: elementaryos-0.3.2-stable-amd64.20151209.iso Here is a list of stuff which I do in the video: After making some space for Freya in Windows, follow: 0. Check if you have booted the installation media in UEFI mode or not. - Fire up a terminal and type the command: [ -d /sys/firmware/efi ] && echo UEFI || echo Legacy If it says UEFI, then continue. If it says Legacy, then type: sudo gdisk -l /dev/sda If it says GPT: present and MBR: protective, then boot the installation media in UEFI mode. Otherwise, this is not the video for you. 1. Switch to Elementary OS Installer, select Language and click continue. 2. Select 'Something Else' and click on continue. 4. Time to create some partitions. - Select the free space and create a new partition on it of type 'swap area' at the end of the free space. - Select the remaining free space and create a new partition with the filesystem ext4 and mount point / - Click on 'Install Now' and then click continue :) 5. Choose your timezone and click on continue. Then choose your keyboard layout :) 6. Enter your account details and click on continue. 7. The installation might take some time, I'll fast forward it. :) :) :) :D 8. Click on 'Restart Now'. Music: 0:00-03:43 Rubix Cube by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ 03:34-07:29 Italian Morning by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://www.twinmusicom.org/ 07:30-10:04 Lasting Hope by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100178 Artist: http://incompetech.com/
Views: 22808 Nehal J Wani
Install Fedora 20 in UEFI Mode (Dual Boot Windows 7/8/10)
 
12:48
This is a sample video showing how to install Fedora 20 in UEFI Mode alongside Windows 8. Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 79051 Nehal J Wani
Install OpenMandriva Lx 2014 in UEFI Mode (Dual Boot Windows 8)
 
15:38
This is a sample video showing how to install OpenMandriva Lx 2014 in UEFI Mode and Dual Boot with Windows 8 Step1: Make some space for installing Mandriva in Windows Step2: Boot OpenMandriva DVD in UEFI mode Step3: Install gparted and make two partitions in the free space Step4: Install OpenMandriva, let the installation of bootoader fail Step5: Mount OpenMandriva partition on /mnt Step6: Mount EFI partition on /mnt/boot/efi Step7: Mount /dev/pts /dev/ /proc /sys /var/run /run on /mnt$i Step8: Chroot into /mnt Step9: Install grub2-efi, run grub2-mkconfig -o /boot/grub2/grub.cfg, run grub-install /dev/sda Step10: Done. Reboot. Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 4463 Nehal J Wani
Install OpenSUSE 13.1 (Bottle) in UEFI Mode (Dual Boot Windows 8)
 
09:16
This is a sample video showing how to install OpenSUSE 13.1 (Bottle) in UEFI Mode and Dual Boot with Windows 8 Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 39958 Nehal J Wani
How to Convert Windows 7/8/8.1/10 Installation from Legacy to UEFI Without Data Loss!
 
07:59
Convert Windows Installation from Legacy to UEFI: (Much Simpler Method at: https://www.youtube.com/watch?v=g1eXD30Fox4) Please note that this technique will work only for those computer systems which support UEFI firmware. Please check that first in your BIOS settings and then continue with this tutorial. Step1: Confirm that you installation is indeed in Legacy Mode. Press WinKey + R and then type msinfo32 and hit enter. The BIOS mode should be Legacy in System Summary. Step2: Download System Rescue Disk and make a bootable media from it. Download the disk from: http://www.sysresccd.org/Download Instructions to make bootable media: http://www.sysresccd.org/Sysresccd-manual-en_How_to_install_SystemRescueCd_on_an_USB-stick#B.29_Recommended_USB_installation_method_from_Windows That is pretty trivial and I won't be covering it in this tutorial. Step3: Reboot into Legacy or UEFI mode using the bootable media that you created in Step2. Step4: Run the command: testdisk Use the arrow keys to navigate. Select your HDD in which Windows is installed in Legacy Mode and press enter. Select [EFI GPT] EFI GPT Partition Map and press enter. Select Analyze and hit enter. Select Quick Search (at the bottom) and hit enter. Select Continue (at the bottom) and hit enter. Hit enter again. Select Write (at the bottom) and hit enter. Press Y and hit enter. Your partition table has changed from MBR to GPT. Step5: Reboot into UEFI mode using Windows recovery/installation media. Step6: Open command prompt. Shortcut is: shift+F10 Step7: Run the following commands: diskpart list disk :Note the disk number which contains your windows installation. Let us say, it is x select disk x list partition :Note the partition number which contains your windows installation. Let us say, it is y select partition y shrink minimum=200 desired=200 create partition efi list partition :Note the partition number of the new one. Let us say, it is z select partition z format fs = fat32 assign letter = b: exit mkdir b:\EFI mkdir b:\EFI\Microsoft cd /d b:\EFI\Microsoft bootrec /fixboot diskpart list vol bcdboot c:\windows /l en-us /s b: /f ALL Please note that here c: denotes the letter of the partition in which windows is installed. Lets find that out first. Step8: Reboot. Tada! Done! Check whether your installation has changed into UEFI or not. THAT's ALL FOLKS! :D Wanna support me? Visit: https://www.patreon.com/nehaljwani Download the Installation media from https://onedrive.live.com/redir?resid=513066133E61F6FA!142&authkey=!AL48G3xvY8yyRQU&ithint=file%2ciso or https://drive.google.com/file/d/0B8gx-_8z_Gq_NU9kZlAxaU52MGc/view?usp=sharing and create a bootable USB by following the video: https://www.youtube.com/watch?v=Q8gQuYekACU In order for me to help you, Please share the output for the commands: diskpart list disk sel disk 0 list vol list partition Take a picture of the output using your smartphone / camera and upload them on imgur.com or picpaste.com and share the link. Music: "Where I am From" By Topher Mohr and Alex Elena
Views: 99590 Nehal J Wani
Windows 7/8/10 Reset Forgotten Password (Ease of Access Center Method)
 
11:20
Simple tutorial showing how to reset any Windows 7/8/10 account password using Windows Recovery Environment. Reset Windows 7/8/10 Password =============================== The Ease of Access Center Method Reboot into Windows recovery environment. If you don't have one, create a bootable USB using the method described in https://www.youtube.com/watch?v=Q8gQuYekACU or just burn a Windows 7/8/10 ISO to a DVD. Boot using the USB / DVD. Click Next - Repair My Computer - Troubleshoot - Advanced Options -Command Prompt or Simply press Shift+F10 anytime. Type the following commands: cd /d C:\Windows\System32 ren Utilman.exe Utilman.exe.bak copy cmd.exe Utilman.exe Here, we basically change the executable for Ease of Access Center with that of command prompt. Type exit and click on 'Turn off your PC'. Now, remove the USB and boot into Windows. Now, click on 'Ease of Access' icon. A command prompt will open. Now, you have two choices. Either you activate the admin account, login, and then reset the password for other user, or, change password directly. In case of 1st option, type this: net user administrator /active:yes net user administrator * ..Type the password here. It won't be visible, for security reasons :) In case of second option, type this: net user ..See the username of the user you want to reset password for net user replace_this_word_with_username * ..Type the password here. It won't be visible, for security reasons :) Type exit and hit enter. In the video, I followed the first method. Time to revert back changes. Click on 'Ease of Access Center' again In case of 1st option, type this: net user administrator /active:no Type exit and hit enter. In case of 2nd option, do nothing :) Boot again, to the recovery environment. Open Command prompt. Now type: cd /d C:\Windows\System32 del Utilman.exe ren Utilman.exe.bak Utilman.exe exit Now remove the bootable media and reboot back to Windows! Done! :D That is all folks! :D Music: I Am a Man Who Will Fight for Your Honor by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/honor/ Artist: http://chriszabriskie.com/ Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 181384 Nehal J Wani
Install Fedora 23 in Legacy Mode (Dual Boot Windows 7/8/10)
 
12:25
This is a tiny tutorial for dual booting Fedora 23 with Windows 7/8/10 in Legacy Mode. After creating some space in Windows, follow: 0. Check if you have booted the installation media in Legacy mode or not. - Fire up a terminal and type the command: [ -d /sys/firmware/efi ] && echo UEFI || echo Legacy The output should say 'Legacy'. If it says 'UEFI', the check the output for the command: sudo gdisk -l /dev/sda - In case it says 'GPT: Present', the follow: https://www.youtube.com/watch?v=gOP_FtP1e9U - If it says 'MBR: Present', then reboot in Legacy mode, and then follow the tutorial. 1. Click on 'Install to Hard Drive' 2. Select Language and click on 'Continue' 3. Wait for sometime and then click on 'Installation Destination' 4. Now you either click on 'Automatically configure partitioning' and then click 'Done' OR: Click on 'I will configure partitioning' and then click on 'Done' 5. Now you can either select a predefined partitioning scheme out of Btrfs/LVM/Standard Partitioning and then click on 'Click here to create them automatically' OR: 5.1 Select 'Standard Partition' 5.2 Click on '+' to create a new partition and select 'swap' as the mount point. 5.3 Click on '+' to create a new partition and select '/' as the mount point and choose the desired space to be 999999 so that this one takes up the entire remaining free space. 6. Click on 'Done' and then click on 'Accept Changes' 7. Click on 'Begin Installation' 8. Click on 'Root Password' and set the root password. 9. Click on 'User Creation' to create a user. Tick on 'Make this user administrator' only if you want this user to have sudo access. I'll fast forward the installation waiting time! :))) 10. Click on 'Quit' and then reboot to check if you are able to boot into the newly installed Fedora 23 Music: 00:00 - 06:20 Fig Leaf Times Two by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1200096 Artist: http://incompetech.com/ Music: 06:21 - 12:24 Out of the Skies, Under the Earth by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/reappear/ Artist: http://chriszabriskie.com/ Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 19642 Nehal J Wani
How to setup Dtella in Linux (Ubuntu)
 
06:41
This Video is meant for IIITH Students only. It is a small tutorial which shows how to setup Dtella for file sharing purposes inside IIITH Campus. Steps: Visit: https://github.com/ffledgling Install dependencies. Open incoming connections to port 13337, UDP Setup virtual environment. Install a direct connect client. Setup dc client. Connect to localhost:7314 Done! Music: CGI Snake by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/divider/ Artist: http://chriszabriskie.com/
Views: 1269 Nehal J Wani
Install LXLE 14.04 in UEFI Mode (Dual Boot Windows 8)
 
10:00
This is a sample video showing how to install LXLE 14.04 in UEFI Mode and Dual Boot with Windows 8 Step1: Make some space for LXLE 14.04 in Windows Step2: Boot LXLE 14.04 live disk in Legacy mode Step3: Make three partitions in the free space Step4: Install LXLE 14.04 in those partitions Step5: Boot Ubuntu Live Media in UEFI Mode Step6: Mount LXLE 14.04 partition on /mnt Step7: Mount EFI partition on /mnt/boot/efi Step8: Mount /dev/pts /dev/ /proc /sys /var/run /run on /mnt$i Step9: Chroot into /mnt Step10: Install grub2-efi, run grub2-mkconfig -o /boot/grub2/grub.cfg, run grub-install /dev/sda Step11: Done. Reboot. Wanna support me? Visit: https://paypal.me/nehaljwani
Views: 4221 Nehal J Wani
Install KaOS 2015 in UEFI Mode (Dual Boot Windows 8/8.1/10)
 
08:54
A tiny tutorial to show how to dual boot KaOS with Windows 10 in UEFI Mode. Here is a list of what I do in the video: (i) Make some space for KaOS in Windows (ii) Make a bootable installation media for KaOS (Not covered in this tutorial) (iii) Attach it to your computer (iv) Reboot Windows after disabling fast shutdown. And use the command shutdown -r -t 0 to do so. (v) Boot into KaOS Installation media in UEFI Mode. (vi) Create three partitions in that empty space: (a) Swap (b) Root, and (c) Boot (vii) Boot into newly installed KaOS (viii) Remove syslinux, install Refind Done! Now you can choose between Windows and KaOS at the start. Yay! Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 2939 Nehal J Wani
Convert Dynamic Disk to Basic Without Data Loss Using TestDisk (Windows 7/8/10)
 
10:48
Convert Dynamic Disk to Basic (Without Data Loss) Using TestDisk ================================================== The following tools claim to perform the task... (a) Minitool Partition Wizard (b) Ease US Partition Manager/Master (c) AOMEI Dynamic Disk Manager ...but the task doesn't work in trial editions. :'( Why another video? Because I don't want you to buy a software or pirate it, but use a free solution. -------------------------------------------------- Open Disk Management As you can see, I have a Dynamic Disk. In this video, I'll show you how to convert it to Basic Disk. Although there is no data loss, I strongly advice the viewers to always keep a backup. Before we proceed, let's have a quick glance at the data that I have. Step 1: Shrink 1MB space from all partitons from the third to the second last. In my case, I have 6 partitions, in the sequence: 1. System Reserved 2. OS (C:) 3. Data (H:) 4. Videos (F:) 5. Music (E:) 6. Movies (G:) I'll shrink the volumes: Data, Videos and Music. Step 2: Download System Rescue Disk from http://www.system-rescue-cd.org/Download and burn the ISO to a CD, or create a bootable USB by following the method: https://www.youtube.com/watch?v=8iqZuCmM2fg Step 3: Boot from the bootable media. (Choose the first option) Step 4: Using testdisk: 4.1 Type testdisk and hit enter. 4.2 Use the up/down arrow keys to choose No Log and hit enter. 4.3 Choose the HDD which you want to convert to Basic. It will be evident by the size. In most cases, it is the first option. Select it then use the left/right arrow keys to choose [Proceed] and hit enter. 4.4 Choose [Intel ] and hit enter. 4.6 Choose [Analyse] and hit enter. 4.5 Choose [Quick Search] (at the bottom) and hit enter... wait for 2 minutes, let it finish. 4.7 Make sure every partition listed here is Green in color. If not, then abort. You might have made a mistake earlier, or forgot to shrink a partition. 4.8 If everything is Green, Hit Enter 4.9 Use the arrow keys to choose [Write] and hit enter. Do not choose [Deeper Search]. If you do, then you have to run testdisk again, because deeper search will try to find all partitions which were ever present on your HDD. 4.10 TestDisk asks for confirmation. Type Y. 4.11 Select OK and hit enter. 4.12 Select [Quit] and hit enter. 4.13 Select Quit using left/right arrow keys and hit enter. 4.14 Type poweroff. This will shutdown computer. Then remove the bootable CD/USB Step 5: Boot the computer. Verify that disk has been converted to Basic and all data is intact. That's all folks!! Thank you for watching!! Leave a comment below if you have any queries. :) :) Bye!!!!! Music: 00:00 - 4:56: Easy Jam by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100245 Artist: http://incompetech.com/ 04:56 - 09:55: Over Time by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ 09:55 - 10:47 The Chance by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/
Views: 46630 Nehal J Wani
Install ElementaryOS (Luna) in UEFI Mode (Dual Boot Windows 8)
 
18:56
This is a sample video showing how to install ElementaryOS (Luna) in UEFI Mode and Dual Boot with Windows 8 Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 31705 Nehal J Wani
How to create Bootable USB for ArchLinux (UEFI and Legacy Compatible) (In Linux)
 
02:38
A short video explaining how to create a bootable USB for ArchLinux (UEFI and Legacy Compatible) in Linux. Steps: 1. Download ArchLinux ISO $ wget http://mirror.cse.iitk.ac.in/archlinux/iso/2015.01.01/archlinux-2015.01.01-dual.iso 2. Figure the the device identifier for USB $ sudo fdisk -l 3. Write the image to USB, using pv to monitor data transfer. $ dd if = archlinux-2015.01.01-dual.iso | pv | of = /dev/sdX #X can vary Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 38231 Nehal J Wani
Configure Fedora for 802.1x Authentication
 
01:07
This video is meant for students at IIIT-H. This is a tutorial showing how to configure and authenticate over 802.1x for LAN resources. I'd like to thank Pankaj Malhotra (https://plus.google.com/100494889728508677568) for providing his system to create this video. I'd like to thank Anhad Jai Singh (https://plus.google.com/117463947968761727443/) for creating this video. Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 1608 Nehal J Wani
Install FFmpeg 2.2.1 in Ubuntu 14.04
 
06:18
For 64 bit OS: List of Dependencies: yasm frei0r-plugins-dev gnutls-bin libgnutls-dev libass-dev libgsm1-dev libmp3lame-dev libopencv-dev libopenjpeg-dev libopus-dev libpulse-dev libschroedinger-dev libsoxr-dev libspeex-dev libtheora-dev libv4l-dev libvorbis-dev libvpx-dev libx264-dev libxvidcore-dev libopenal-dev libcdio-paranoia-dev Compilation options: ./configure --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib/x86_64-linux-gnu/ --mandir=/usr/share/man --arch=x86_64 --optflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic' --enable-bzlib --disable-crystalhd --enable-frei0r --enable-gnutls --enable-libass --enable-libcdio --enable-libdc1394 --disable-indev=jack --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-openal --enable-libopencv --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libv4l2 --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-avresample --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib/x86_64-linux-gnu/ --enable-runtime-cpudetect For 32 bit OS: List of Dependencies: yasm frei0r-plugins-dev gnutls-bin libgnutls-dev libass-dev libgsm1-dev libmp3lame-dev libopencv-dev libopenjpeg-dev libopus-dev libpulse-dev libschroedinger-dev libsoxr-dev libspeex-dev libtheora-dev libv4l-dev libvorbis-dev libvpx-dev libx264-dev libxvidcore-dev libopenal-dev libcdio-paranoia-dev libopencore-amrwb-dev libopencore-amrnb-dev Compilation options: ./configure --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib --mandir=/usr/share/man --enable-runtime-cpudetect --enable-gpl --enable-version3 --enable-postproc --enable-avfilter --enable-pthreads --enable-x11grab --enable-vdpau --disable-avisynth --enable-frei0r --enable-libdc1394 --enable-libgsm --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions --param=ssp-buffer-size=4 -grecord-gcc-switches -m32 -march=i686 -mtune=atom -fasynchronous-unwind-tables' --disable-stripping Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 10704 Nehal J Wani
Bootable USB with Turbo C++ on FreeDOS
 
04:35
This is a video tutorial on how to create a bootable Free DOS USB device and run TurboC++ from it Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 2632 Nehal J Wani
Install Lubuntu 14.04 in UEFI Mode (Dual Boot Windows 8)
 
06:36
This is a sample video showing how to install Lubuntu 14.04 in UEFI Mode and Dual Boot with Windows 8 Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 10490 Nehal J Wani
Solution To "Virtual Disk Service error: There is not enough usable space for this operation."
 
06:37
Solution to: Virtual Disk Service error: There is not enough usable space for this operation. In this tutorial, I am trying to create an EFI partition and a primary partition. You may be wanting to do only one of them. In that case, first read and understand what I do and then follow suit. Don't copy paste blindly! :D :) 1. Let's open diskpart. Type: diskpart 2. Let's select the disk in which we want to create partition. Type: list disk sel disk 0 3. Let's try to create a new primary partition create par primary 4. Whoops, that didn't work. Let's try to create an EFI partition create par efi 4.1 If you get the error: "MSR and EFI partitions are only supported on GPT disks." That means that the partition table of your Hard Disk is MBR and not GPT, so you can't create an EFI partition. You can still follow the rest of the tutorial to understand the error which brought you to this video :) :) 5. Whoops, even that didn't work. What is common in both cases? Oh yes, we didn't have enough space for either!! Let's shrink some space from one of the existing partitions. 6. Let's see which partition is worth shrinking. list par 7. As you can see, I have three partitions. I'd like to shrink the one which is the biggest in size. 8. Select the partition that you wish to shrink. It is the 2nd one in my case. sel par 2 9. We will create two partitions. 9.1 Let's first create the EFI partition of size 200MB shrink desired = 200 minimum = 200 create par efi size = 200 #This will automatically select the newly created partition. format fs = fat32 assign letter = B: 9.2 Now, it's time for the primary partition. 9.2.1 Let's select the partition again, which I wanna shrink. sel par 2 shrink desired = 4096 minimum = 4096 # 4GB # I'll fast forward the waiting :P create par primary size = 4096 format fs = ntfs assign letter = Z: 10. That's all folks! :) Music: 0:00 - 03:23 Bushwick Tarentella - Thatched Villagers by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300002 Artist: http://incompetech.com/ Music: 3:24 - 06:36 Let's Do It By 'Topher Mohr and Alex Elena' Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 89159 Nehal J Wani
Migrate/Upgrade/Update Zimbra 7.1.2 to Zimbra 7.2.7
 
28:29
This video shows a sample migration from Zimbra 7.1.2GA to Zimbra 7.2.7GA.
Views: 2493 Nehal J Wani
How to create Bootable USB for System Rescue Disk (UEFI and Legacy Compatible) (In Windows 7/8/10)
 
10:48
Simple Tutorial on how to make a bootable USB for system rescue disk, which is compatible with UEFI as well as Legacy mode. 1. First keep a copy of the systemrescue disk ISO ready with you. 2. Attach your USB drive. 3. Open diskpart (via command prompt), select the USB disk (number will be obvious based on size), perform a 'clean', create a 1GB FAT32 partition, assign it a letter. 4. Download system rescue disk installer, as instructed on the website. 5. Create a temporary directory 'Temp' on Desktop. 6. Run the installer. 7. Select the directory created in the previous step. 8. Extract ISO contents. 9. Select the USB device and then click Install. 10. Open the file \boot\grub\grub-$version-number.cfg inside the USB drive. 11. Replace all instances of the string "isolinux" with "syslinux" 12. Reboot! Link to sys recue installer for Windows: https://drive.google.com/file/d/0B8d4Lb_KJbfdbTc0WlZlYXA5azQ/view?usp=sharing Music: Chance, Luck, Errors in Nature, Fate, Destruction As a Finale by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/reappear/ Artist: http://chriszabriskie.com/ Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 25334 Nehal J Wani
Qemu: CPU Hot-Plugging
 
06:25
Tutorial showing how to hot plug CPUs using QEMU's 'cpu-add id=X' qmp command and how to awaken the hot-plugged CPUs automatically using udev rules. Wanna support me? Visit: https://www.patreon.com/nehaljwani
Views: 851 Nehal J Wani